2024
New module - the disting NT
03/10/24 10:00 Filed in: hardware updates
We're delighted to announce a new Eurorack module, the disting NT.
Available immediately, stock permitting - see Where To Buy.
Available immediately, stock permitting - see Where To Buy.
New module - the ES-10
22/08/24 11:00 Filed in: hardware updates
We're delighted to announce a new Eurorack module, the ES-10.
The ES-10 is an 8-in/8-out ADAT interface, with DC-coupled inputs and outputs that can be used for both audio and CVs.
Each input can be individually selected for modular or line level operation.
The outputs can be expanded via the ES-5 module.
The ES-10 uses AKM 'VELVET SOUND' DACs and ADCs and low noise audio op-amps for the best possible sound quality.
Available immediately, stock permitting - see Where To Buy.
The ES-10 is an 8-in/8-out ADAT interface, with DC-coupled inputs and outputs that can be used for both audio and CVs.
Each input can be individually selected for modular or line level operation.
The outputs can be expanded via the ES-5 module.
The ES-10 uses AKM 'VELVET SOUND' DACs and ADCs and low noise audio op-amps for the best possible sound quality.
Available immediately, stock permitting - see Where To Buy.
disting EX firmware v1.25 released
27/05/24 11:45 Filed in: hardware updates
Version 1.25 of the disting EX firmware is now released. This update adds the Quadraphonic Mixer algorithm, as well as many other enhancements and fixes.
Download the new firmware from here.
Download the new firmware from here.
New module - Otterley
22/02/24 08:00 Filed in: hardware updates
We're delighted to announce a new Eurorack module, Otterley.
Otterley is a multi-LFO module, designed to offer extensive modulation possibilities, with a good amount of control and flexibility, while remaining nicely compact.
Four of the outputs are switchable between sine and square LFOs. Their frequencies are jointly set by the Speed and Spread knobs, which control the base speed and the speed difference between the outputs, respectively. Both controls also have CV inputs. These four outputs can also be switched between bipolar (±5V) and unipolar (10V positive or negative), and can be reset to the start of their cycle via the Reset input.
A fifth output offers another, independent, sine LFO with its own speed knob.
The module is 100% analogue.
Otterley is available immediately, stock permitting - see Where To Buy.
Otterley is a multi-LFO module, designed to offer extensive modulation possibilities, with a good amount of control and flexibility, while remaining nicely compact.
Four of the outputs are switchable between sine and square LFOs. Their frequencies are jointly set by the Speed and Spread knobs, which control the base speed and the speed difference between the outputs, respectively. Both controls also have CV inputs. These four outputs can also be switched between bipolar (±5V) and unipolar (10V positive or negative), and can be reset to the start of their cycle via the Reset input.
A fifth output offers another, independent, sine LFO with its own speed knob.
The module is 100% analogue.
Otterley is available immediately, stock permitting - see Where To Buy.