Reference

Auto-Fade

The auto-fade controls allow you to smoothly and automatically fade the loop in and out, effectively turning the 'Effect' level control for you.

The 'Fade' button activates the fade operation. Press to fade out; press again to fade back in.

The 'Fade Override' button quickly completes the fade operation, in either direction.

The 'Fade In' and 'Fade Out' knobs set the corresponding fade times, in seconds (up to 30s).

The indicator below the 'Fade In' knobs shows the current level of the fade envelope (0.0 being fully faded out, 1.0 being fully faded in).

The menu below the 'Fade Out' knob allows you to automatically clear the loop (i.e. as if you pressed the 'Clear Loop' button) when the fade out is complete. There are two settings (plus 'No Clear'):

AutoClear - simply activates loop clearing after a fade out.
AutoClr2 - activates loop clearing after a fade out, then does an instant fade-in after the loop is clear.